Test Product
Equipped with Matrice 4D or Matrice 4TD high-performance drones, DJI Dock 3 empowers 24/7 remote operations and, for the first time, supports mobile vehicle-mounted deployment, effortlessly adapting to various environments. The drones utilise the same cameras as the Matrice 4 Series but offer improved flight and protection performance. They can also pair with DJI RC Plus 2 Enterprise for standalone use. With DJI FlightHub 2's intelligent features, pilots can significantly cut down on operational time and labor costs, maximizing efficiency and savings.
Master All Environments
Heat Resistant
Built to withstand extreme heat, DJI Dock 3 operates and charges seamlessly even in temperatures soaring up to 50° C (122° F), ensuring efficient operations.
50° C Highest Operating Temperature
Cold Resistant
Perform critical tasks reliably despite frigid temperatures in environments where temperatures can plunge below -20°C (-4°F). After preheating, it can operate stably in harsh environments as low as -30° C (-22° F).
-30° C Lowest Operating Temperature
Wind Resistance
Both Matrice 4D and 4TD demonstrate remarkable flight performance. In winds as strong as 12 m/s, they can achieve stable takeoff and landing, and stay in the air for up to 32 minutes. [1]
12 m/s Max Wind Speed Resistance
Rugged and Dependable
Dock 3's design safeguards its internal systems from external conditions by encapsulating electronic components, allowing for seamless operations even in harsh environments.
IP56 DJI Dock 3 [2]
IP55 DJI Matrice 4D/4TD [2]
Low-Noise and Anti-Ice Propellers
Standard equipped with low-noise anti-ice propellers, the Matrice 4D and 4TD drones can maintain stable flight even in freezing rain. The silent design reduces noise during operations.
Flexible Deployment, Ultra-Long Transmission
DJI Dock 3 can be flexibly deployed, redefining the paradigm of operations. For fixed deployments, signal quality can be enhanced by installing the next-gen D-RTK 3 Relay at elevated locations, allowing for flexible site selection of the dock. With the new DJI Enterprise app, deployment can be completed using just a smartphone. [3] Additionally, for the first time, a DJI Dock supports vehicle-mounted deployment, enabling more efficient dispatch during urgent operations and long-distance inspections.
Fixed-Mounted Deployment
The new D-RTK 3 Relay Fixed Deployment Version [4] offers superior anti-interference performance for video transmission and satellite acquisition. Installing it at elevated locations can effectively address RTK and video transmission signal issues caused by obstructions, extending the maximum transmission distance to 25 km. This capability allows for flexible site selection of Dock 3 based on actual operational needs.
Near High-Rise Buildings [30]
Installing the D-RTK 3 Relay on rooftops can significantly enhance signal quality, allowing Dock 3 to be deployed next to high-rise buildings or substation walls.
Near Communication Towers [5][30]
Deploying the D-RTK 3 Relay on a nearby communication tower can significantly enhance signal quality during Dock 3 operations, ensuring safe takeoffs and landings even in environments with interferences from the communication tower.
Mobile Vehicle-Mounted Deployment
DJI Dock 3 is DJI's first Dock to support mobile vehicle-mounted deployment. [6] Optimised for this purpose, the Dock's overall structure, components, and air conditioning have undergone vehicle vibration testing, with new features such as horizontal calibration and cloud-based dock location calibration. For emergency operations or long-distance inspections, using DJI Dock 3 Vehicle-Mounted Gimbal Mount [4] for mobile deployment provides a convenient solution when fixed deployment is impractical in temporary scenarios.
Cloud-Based Dock Location Calibration - During mobile operations, indoor personnel can use DJI FlightHub 2 to remotely set the dock's location and assign tasks on the cloud, thereby enhancing personnel and scheduling efficiency.
Safe Dual-Dock Deployment - Two docks can be deployed on a single vehicle simultaneously, achieving a significant efficiency boost. DJI Dock 3 employs a special take-over pattern to avoid drone-to-drone collisions and ensure operational safety, allowing the two docks to alternate tasks in an orderly manner.
Dual-Drone Rotation [5] - Automated hovering rotation of two drones enables continuous real-time aerial footage transmission. In emergency scenarios, a spotlight can be equipped to provide full-time illumination.
High-Performance Drones
The all-new water and dust-resistant DJI Matrice 4D and 4TD are specifically designed for DJI Dock 3, offering extended flight time, and can pair with DJI RC Plus 2 Enterprise for standalone use. Both drones are equipped with a wide-angle camera, a medium tele camera, a tele camera and a Laser Range Finder. Matrice 4D is highly effective for professional high-precision mapping and detailed surface inspections. Matrice 4TD is equipped with an infrared thermal camera and a new NIR auxiliary light, making it suitable for a wide range of applications such as infrastructure inspections, emergency response, and public safety.
DJI MATRICE 4D
Wide-Angle Camera - 4/3 CMOS, 20MP Effective Pixels, f/2.8-f/11, 24mm Format Equivalent, Mechanical Shutter
Medium Tele Camera - 1/1.3-inch CMOS, 48MP Effective Pixels, f/2.8, 70mm Format Equivalent
Tele Camera - 1/1.5-inch CMOS, 48MP Effective Pixels, f/2.8, 168mm Format Equivalent
Laser Range Finder - Measurement Range: 1800 m (1 Hz);, Oblique Incidence Range (1: 5 Oblique Distance): 600 m (1 Hz), Blind Zone: 1 m, Range Accuracy (m): ± (0.2 + 0.0015 × D) [7]
DJI MATRICE 4TD
Wide-Angle Camera - 1/1.3-inch CMOS, 48MP Effective Pixels, f/1.7, 24mm Format Equivalent
Medium Tele Camera - 1/1.3-inch CMOS, 48MP Effective Pixels, f/2.8, 70mm Format Equivalent
Tele Camera - 1/1.5-inch CMOS, 48MP Effective Pixels, f/2.8, 168mm Format Equivalent
Laser Range Finder - Measurement Range: 1800 m (1 Hz);, Oblique Incidence Range (1: 5 Oblique Distance): 600 m (1 Hz), Blind Zone: 1 m, Range Accuracy (m): ± (0.2 + 0.0015 × D) [7]
NIR Auxiliary Light [9] - 6° FOV, 100m [10] Illumination Distance
Infrared Thermal Camera [8] - 640×512 Resolution, f/1.0, 53mm Format Equivalent, Uncooled VOx Microbolometer, Supports UHR Infrared Image mode
Longer Flight Time, Robust Protection
When fully charged, Matrice 4D/4TD delivers an impressive flight time of 47 minutes at a speed of 15 m/s, achieving a remarkable 37% increase in operation time. [11] At a radius of 10 km, these drones provide 18 minutes of operation. [12] Both models are designed to endure harsh conditions with an impressive IP55 dust and water resistance rating.
54 Minute Forward Flying [13]
47 Minute Hovering [14]
IP55 Protection [2]
Obstacle Sensing for Safe Operation
The Obstacle Sensing Module [4] for Matrice 4D/4TD combines rotating LiDAR and millimetre-wave radar technologies for precise 12mm wire-level obstacle avoidance at speeds up to 15 m/s in complex power line crossings, as well as enhanced positioning in low-light conditions. [5] Operational safety are ensured for varying environments of power distribution network and the intricate layouts of substations.[15]
Unmatched Clarity and Precision for Any Task, Anytime
Excels in Low-Light Environments
Matrice 4D Series drones feature four high-resolution, low-light fisheye lenses, significantly enhancing [11] visual low-light positioning and obstacle sensing capabilities.
The new Night Scene mode offers full-color night vision. Matrice 4TD additionally provides IR-Cut Filter feature for black-and-white night vision and 24/7 operations, as well as a new NIR auxiliary light that can cover distances up to 100 m. [10]
Matrice 4TD's infrared thermal camera supports the UHR Infrared Image mode with image resolutions up to 1280 × 1024 and a High-Res mode for detailed temperature readings.
Clear Vision and Stable Images
Matrice 4D Series drones are equipped with medium tele and tele cameras with foreground stabilization. The medium tele camera is effective for medium-range inspections, detecting pins and cracks from 10 metres, and clearly reading instrument data at substations. [16]
The 48 MP tele camera captures details, like signs, from up to 250 m away. [17] When using Matrice 4TD's tele camera as the aircraft is hovering in a windless environment, the gimbal can tilt upwards by 80 degrees, making bridge underside defects clearly visible.
Upgraded stabilisation keeps foreground subjects clear during telephoto shots at 10x zoom or higher.
High-Precision Surveying
Matrice 4D Series drones excel in high-precision mapping, offering a new 5-direction oblique photography function, 3-direction orthophoto photography, [5][18], and real-time terrain following to meet various mapping requirements.
DJI FlightHub 2 has been upgraded for Matrice 4D/4TD operations. This upgrade introduces a range of flight route planning options, including Smart 3D Capture routes [5], geometric routes, and slope routes, enhancing efficiency while ensuring detailed modeling.
Seamless Airborne Relay for Mountainous Terrains
Matrice 4D Series can operate with the DJI RC Plus 2 Enterprise remote controller for standalone use while featuring an innovative onboard relay function. With this setup, one drone can fly high as a relay, allowing another drone to operate at a greater distance. The relay drone automatically faces the operating drone, [5] ensuring smooth video transmission without a 4G signal or in obstructed conditions. [19] This capability significantly extends the transmission range, making it ideal for SAR tasks and inspections in mountainous areas.
DJI FlightHub 2 Intelligent Features
When paired with DJI FlightHub 2, Dock 3 greatly enhances the intelligence and efficiency of remote operations.
Intelligent Flight and Control
Automated Routes
The new automated flight route is useful across various scenarios, including public safety and inspections. Once a flight route is established, the drone can automatically detect and capture images or videos of subjects like vehicles and vessels and infrared temperature anomalies, and send notifications to the operators.
Intelligent Change Detection
The new intelligent change detection feature enables efficient periodical analysis of changes in an area, assisting operators in environmental protection, natural disaster relief and crack detection for more effective and informed decision making.
Smart Track
Operators can utilise the powerful auto-zoom capabilities of the Matrice 4D Series to quickly track a subject, such as a vehicle or a vessel for efficient follow-up review.
Virtual Cockpit
The Virtual Cockpit remote control interface has been significantly enhanced with the introduction of the new Mouselook feature. This enhancement allows the drone to adjusts its attitude and gimbal orientation automatically, enabling rapid and precise centering of the frame, thus achieving "point and see."
Efficient Operation
Open and Fly
Take off quickly and arrive at the emergency site to improve situational awareness. After enabling optimal route planning, use FlyTo Tasks to reach a designated point 1 km away and at 100m height within 100 seconds. [12]
Low-Latency Live View
Engine upgrade significantly reduces [11] live view latency on FlightHub 2, providing reliable support for real-time decision-making.
Transmit While Flying
In emergency scenarios, real-time data transmission and rapid modeling can be achieved during flight. Data transfer can be completed immediately upon landing, [20] and a rough model can be quickly generated via the cloud, significantly enhancing efficiency.
Security Compliance
FlightHub 2 Custom Permission Management
FlightHub 2 has upgraded its permission management, allowing users to configure management permissions according to actual needs.
FightHub 2 Achieves ISO 27001 Certification
FlightHub 2 uploads, stores and manages data on Amazon Web Services (AWS) cloud servers, which are also ISO/IEC 27001 certified, ensuring secure and compliant data processing.
4G Dongle Private Deployment
With DJI Cellular Dongle 2 [21], the aircraft can connect to 4G networks. In complex operational environments, the 4G network works in tandem with O4+ video transmission system to ensure a stable transmission and enhance flight safety. 4G enhanced video transmission service can be privately deployed and used in conjunction with the FlightHub 2 on-premises version to further enhance the stability and security of data transmission.
Open Ecosystem, Breaking Boundaries
Intelligent Algorithm Developer
Provides necessary model training tools and assist in the third-party developer certification process, helping expand new intelligent applications. [5]
PSDK
E-Port and E-Port Lite encryption authentication ensure secure and worry-free payloads, enabling the Matrice 4D Series to have broader application scenarios.
MSDK
Mobile SDK 5 simplifies the development of apps to control the Matrice 4D Series. Mobile SDK 5 is fully open source and comes with production code samples of core DJI Pilot 2 modules, ensuring its reliability.
Cloud-to-Cloud Coordinated Operation
Through DJI FlightHub 2's FlightHub Sync function, users can easily link it to a third-party cloud platform for flexible management of data.
Cloud API
With DJI Pilot 2's built-in Cloud API (MQTT-based protocol) you can directly connect the Matrice 4D Series to third-party cloud platforms. Access the drone's hardware, video live-stream, and photo data without having to develop an app.
Third-Party Payloads
Enable more functionality by connecting third-party payloads [4] such as parachute via the aircraft's E-Port or remotely control added payloads via DJI FlightHub 2. [22] It also features an additional port for PSDK payload at the rear.
DJI Terra API
With the DJI Terra API, users can integrate its powerful mapping capabilities into their own platforms, achieving automated 2D and 3D reconstructions. Additionally, users can customise photogrammetry workflows as needed, allowing the Matrice 4D's operational results to meet the needs of various industry applications better.
Comprehensive Accessory Upgrades [23]
D-RTK 3 Relay Fixed Deployment Version
The D-RTK 3 Relay Fixed Deployment Version enables centimetre-level high-precision positioning for drones. Equipped with signal relay functionality, it can effectively address obstruction issues when deployed at elevated locations, significantly enhancing video transmission distance and easing deployment conditions of Dock 3.
Integrated Broadcasting and Lighting
The spotlight and speaker can function independently or together, addressing various operational scenarios.
DJI 240W Power Adapter
Featuring multi-port compatibility and intelligent protections, the power adapter can fast charge drone batteries with the charging hub.
Obstacle Sensing Module
The new Obstacle Sensing Module combines rotating LiDAR and millimetre-wave radar [24] technology for precise 12mm wire-level obstacle avoidance at speeds up to 15 m/s in complex power line crossings, as well as enhanced positioning in low-light conditions. Operational safety are ensured for varying environments of power distribution network and the intricate layouts of substations.
DJI RC Plus 2 Enterprise
DJI RC Plus 2 Enterprise remote controller features a new high-brightness screen that remains clearly visible even in direct sunlight. It has an IP54 protection rating and can operate in temperatures ranging from -4°F to 122°F (-20°C to 50°C). It features a built-in high-gain antenna array, providing strong performance. It also supports SDR and 4G hybrid transmission solutions, ensuring stable and smooth video transmission in urban high-rise areas and mountainous environments.
DJI Matrice 4D Series 240W Charging Hub
When used with the Power Adapter, the Charging Hub intelligently selects the battery that will charge the fastest, sequentially charging three Matrice 4D Series batteries. It supports both Standard Mode and Ready-to-Fly mode.
Gimbal-Following Spotlight
The DJI AL1 SpotLight can illuminate subjects up to 100 metres away, [25] and features two modes, Always-On and Strobe. It can connect with the gimbal, enabling it to follow the camera's movements to ensure the illuminated area aligns with the camera's view. Additionally, the spotlights can focus on a single object or offer a wide field of view (FOV) which illuminates larger areas. It also supports an IP55 protection rating. [26]
DJI Cellular Dongle 2 [21]
The DJI Cellular Dongle 2 offers 4G network video transmission and can work together with the O4+ Enterprise video transmission system, ensuring safe flights in complex environments. Additionally, it provides mobile network connectivity for the remote controller.
DJI Power 1000
DJI Power 1000 natively supports the DJI Matrice 4D Series 240W Charging Hub, and offers 2200W AC output, ensuring a reliable and stable power supply for outdoor operations. Additionally, it can be paired with the DJI Power 1kW Super Fast Car Charger, allowing for 1kW fast charging, supporting outdoor operations with continuous power and uninterrupted journeys.
Real-Time Voice Speaker
The DJI AS1 Speaker offers impressive sound power and extensive range. It has a broadcast range up to 300 metres [27] and can produce a volume up to 114 decibels at a distance of 1 metre. It supports recorded messages, media imports, and text-to-speech conversion. [28] Additionally, it features real-time broadcasting and echo suppression, enhancing the efficiency and flexibility of emergency SAR operations. It also supports an IP55 protection rating. [26]
Purchase DJI Matrice 4D/4TD Series and Get 1 Year of DJI Care Enterprise Plus or 1 Year of Official Extended Warranty Service for Free [29]
DJI Care Enterprise Plus
Comprehensive Protection | Professional Quality Assurance | Exclusive Service | Service Starts with Activation
Free Repairs
Unlimited number of free repairs within the coverage limit
Battery Replacement
2 batteries per year, long-lasting runtime
Coverage for Your Whole Fleet
Shared limit for maximum protection
Free Shipping
Free mail-in repairs, hassle-free service
Expert Service
Rapid response from DJI product experts
Extended Warranty Service
In addition to the official warranty, an extra 1-year warranty extension is provided. Major parts are covered by the official warranty, with support provided by our professional engineers.
Official Service
Supported by professional engineers
Quality Repairs
Original parts, guaranteed quality
Notes:
* All data on this page was collected using a production model DJI Dock 3 and DJI Matrice 4D/4TD in a controlled environment. Actual results may vary depending on the environment, usage, and firmware version.
** All videos and photos on this page were taken in strict compliance with local laws and regulations. Demos are for reference only. Please observe local laws and regulations and ensure that the aircraft has obtained relevant certifications before flying.
*** DJI Matrice 4D/4TD must be activated via the DJI Pilot 2 app or the DJI Enterprise app before use.
**** To ensure that the equipment operates steadily and continuously, please perform regular maintenance.
1. Measured when using a new battery with at least 95% battery at takeoff and at least 15% battery at landing. The data is for reference only. Always pay attention to reminders in FlightHub 2 or the DJI Pilot 2 app during flight.
2. DJI Dock 3 is IP56 rated, and the DJI Matrice 4D/4TD is IP55 rated. Both were tested under controlled laboratory conditions, with the dock's distribution cabinet door closed and screws tightened. The IP rating is not permanently effective and may decrease due to product wear and tear.
3. Requires using with Android phones for deployment and commissioning.
4. Sold separately.
5. Need to upgrade to the latest firmware.
6. Vehicle mounting must comply with local regulations. Pay attention to road safety and height restrictions while driving.
7. D represents the measurement distance.
8. Only available with Matrice 4TD. DO NOT expose the infrared camera lenses to strong sources of energy such as the sun, lava, or a laser beam. Otherwise, the camera sensor may be burned leading to permanent damage.
9. Only available with Matrice 4TD. The NIR auxiliary light is suitable for the lighting needs of the tele camera.
10. Measured with the drone hovering 100 metres above the ground and the tele camera effectively capturing images.
11. Compared with DJI Dock 2's Matrice 3D/3TD.
12. Measured at an ambient temperature of approx. 25° C (77° F), with a safe battery level of 15%, in a windless environment, and a round-trip speed of approx. 15 m/s. This value is for reference only, and the actual operation data may vary.
13. Measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 12 m/s in a windless laboratory environment at 20 metres above sea level, in photo mode (without photo-taking operation during flight), with Obstacle Avoidance Action set to Off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
14. Measured with the DJI Matrice 4D series drones hovering in a windless environment at 20 metres above sea level and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
15. Official repair will be provided free of charge if a collision occurs due to obstacle avoidance failure, resulting in damage to the drone or the Obstacle Sensing Module, provided that the following conditions are met: the Obstacle Sensing Module is installed, the drone is flying automatically along a preset route, all equipment is operating normally, GNSS signal is strong, weather conditions are favorable, and both millimetre-wave radar and LiDAR are functioning properly. Please note that free repair is not provided in the following scenarios:
(1) Presence of fast-moving objects around the flight route (e.g., operating wind turbines, moving tower cranes, birds in flight, etc.);
(2) Special weather conditions such as rain, snow, fog, or dust;
(3) Radar cannot be certified and activated in certain countries and regions due to national policy restrictions. For details, please consult your local dealer;
(4) The Obstacle Sensing Module is out of warranty.
16. Measured under standard lighting conditions from a horizontal position 10 metres away from the subject, with a direct line of sight.
17. Captured with the tele camera directly facing the object.
18. The current functionality is insufficient to meet the needs of urban area mapping. Future updates will continue to optimise flight routes and mapping solutions for urban areas.
19. There should be no obstructions between the remote controller and the relay aircraft, and between the relay aircraft and the operational aircraft. Strong electromagnetic interference may affect the video transmission distance.
20. In an outdoor, open environment, without interference, and with FCC compliance, the drone can typically complete the transmission of footage to the dock when the distance between the drone and the dock is within 1 kilometre. The speed of transmission from the dock to the cloud depends on the user's network conditions.
21. Sold separately. This service is not available in some countries and regions. Please consult your local dealer for details.
22. Please consult your dealer first to ensure that the payload is compatible with DJI FlightHub 2.
23. Certain accessories are sold separately. Installing certain accessories may affect the obstacle avoidance safety performance of the aircraft. Please follow the instructions for use.
24. Due to national policy restrictions on radar certification, this feature is not supported in certain countries and regions. For more details, please consult your local dealer.
25. This is the result at a distance of one hundred metres from the subject, for reference only.
26. When installing onto the aircraft, tighten the screws and ensure proper sealing of the interface. When using with DJI Dock, please use the included hex key to tighten the screws again.
27. This data was measured in an experimental environment with an ambient temperature of 25° C (77° F) and is for reference only. Actual conditions may vary slightly due to differences in software versions, audio sources, specific environments, and other factors. The final effect is subject to actual use.
28. The current text-to-speech function only supports English and Mandarin Chinese.
29. DJI Care Enterprise service may vary by country/region. For details, please consult your local dealer; Unlimited Number of Free Repairs: Get free repairs within the coverage scope and amount; Shared Coverage: DJI Enterprise products that activate and bind DJI Care Enterprise Plus within the same period (30 calendar days) can share coverage limits; Free Shipping: Available in regions covered by DJI Care Enterprise. Users are responsible for additional costs including logistics and customs duties incurred beyond the scope of coverage; Official Extended Warranty Coverage: Includes the aircraft body, gimbal camera, remote controller, and charging hub.
30. The functionalities of building-side deployment and communication tower deployment rely on the service area of the satellite positioning system, currently only supporting most regions in the Asia Pacific, as detailed in the Installation and Setup Manual. The specific applicability should be determined based on the results displayed on the DJI Pilot 2 app during dock site evaluation. During communication tower deployment, the dynamic power variation of communication base stations may cause signal interference, potentially affecting drone takeoff in rare cases. If such issues occur, please try restarting the aircraft and reissuing the flight task.
Product Specifications
Dock - General
Product Name: DJI Dock 3
Total Weight: 55 kg (without aircraft)
The actual product weight may vary due to differences in batch materials and external factors.
Dimensions: Dock Cover Opened: 1760×745×485 mm (L×W×H)
Dock Cover Closed: 640×745×770 mm (L×W×H)
All data includes the RTK module width (160 mm), wind speed gauge height (145 mm), and mounting base brackets (58 mm).
Input Voltage: 100-240 V (AC), 50/60 Hz
Input Power: Max 800 W
Operating Temperature: -30° to 50° C (-22° to 122° F)
Ingress Protection Rating: IP56
Number of Drones Accommodated: 1
Max Allowable Landing Wind Speed: 12 m/s
Max Operating Altitude: 4500 m
Receiving Frequency of RTK Base Station Satellite: Simultaneously receive:
GPS: L1 C/A, L2, L5
BeiDou: B1l, B2l, B3l, B2a, B2b, B1C
GLONASS: F1, F2
Galileo: E1, E5a, E5b, E6
QZSS: L1, L2, L5
Positioning Accuracy of RTK Base Station: Horizontal: 1 cm + 1 ppm (RMS)
Vertical: 2 cm + 1 ppm (RMS)
Dock - Charging Performance
Output Voltage: 35 V DC
Charging Time: 27 minutes
The data was measured when charging the aircraft (when powered off) from 15% to 95% in a 25° C (77° F) environment.
Dock - Video Transmission
Operating Frequency: 2.400-2.4835 GHz
5.150-5.250 GHz (CE: 5.170-5.250 GHz)
5.725-5.850 GHz
The supported operating frequency bands and their corresponding availability vary by country/region. For details, please refer to local laws and regulations.
Antenna: Built-in 9 antennas, 2T4R, supports intelligent switching
Transmitter Power (EIRP): 2.4 GHz: < 33 dBm (FCC), < 20 dBm (CE/SRRC/MIC)
5.2 GHz (CE: 5.170-5.250 GHz): < 23 dBm (FCC/CE)
5.8 GHz: < 33 dBm (FCC); < 14 dBm (CE); < 30 dBm (SRRC)
Dock - Air Conditioning System
Operating Voltage: 48 V DC
Air Conditioning Type: Compressor-based air conditioning
Dock - Backup Battery
Battery Capacity: 12 Ah
Output Voltage: 12 V
Battery Type: Lead-acid battery
Battery Life: > 4 hours
Measured with a fully charged backup battery in a 25° C (77° F) environment. After a power outage, the dock does not support functions like aircraft charging, air conditioning operation, dock cover heating, and wind speed gauge heating. Please restore power promptly.
Dock - Network Access
Ethernet Access: 10/100/1000Mbps adaptive Ethernet port
4G Access: Requires DJI Cellular Dongle 2
Sold separately. This service is not available in some countries and regions. Please consult your local dealer for details.
Dock - Sensor
Wind Speed Sensor: Supported
Rainfall Sensor: Supported
Ambient Temperature Sensor: Supported
Water Immersion Sensor: Supported
In-Cabin Temperature Sensor: Supported
In-Cabin Humidity Sensor: Supported
Dock - Security Camera (External)
Resolution: 1920×1080
Field of View (FOV): 151°
Auxiliary Light: Auxiliary White Light
Dock - Security Camera (Internal)
Resolution: 1920×1080
FOV: 151°
Auxiliary Light: Auxiliary White Light
Dock - Lightning Protection
AC Power Port: 20 kA (rated value), meets EN 61643-11 Type 2 and IEC 61643-1 Class Ⅱ protection level requirements
Ethernet Port: 10 kA (Itotal),meets EN/IEC 61643-21 Category C protection level requirements
Dock - Supported Software
Applications: DJI Enterprise app (used with Android phones for deployment and commissioning)
Cloud Platform: FlightHub 2
FlightHub 2 On-Premises Version: FlightHub 2 FlightHub Sync
DJI Cloud API:
Dock - Expansion Capability
Edge Computing: Supports data communication with external switches
Aircraft - General
Weight: 1850 g
This value includes the weight of the battery, propellers, and a microSD card, but does not include third-party payloads. The actual weight may vary due to differences in batch materials and external factors.
Max Takeoff Weight: 2090 g
Dimensions: 377.7×416.2×212.5 mm (L×W×H, without propellers)
Wheelbase: Diagonal Wheelbase: 498.5 mm
Front Motor Left-Right Wheelbase: 383.0 mm
Rear Motor Left-Right Wheelbase: 343.0 mm
Front-Rear Wheelbase: 341.6 mm
Max Ascent Speed: 6 m/s (Normal Mode)
10 m/s (Sport mode)
Max Descent Speed: 6 m/s (Normal Mode)
8 m/s (Sport mode)
Max Horizontal Speed (at sea level, no wind): Normal Mode, With Obstacle Sensing Enabled: 15 m/s flying forward, 12 m/s flying backward, 10 m/s flying sideways
Sport Mode: 21 m/s flying forward, 19 m/s flying backward, 15 m/s flying sideways
When used with DJI Dock, only Normal mode is supported.
Max Wind Speed Resistance: During Operation: 12 m/s
During Takeoff/Landing: 12 m/s
Max Takeoff Altitude: 6500 m
Max Flight Time: 54 minutes
Measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 12 m/s in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), with Obstacle Avoidance Action set to Off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Hovering Time: 47 minutes
Measured with the DJI Matrice 4D Series drones hovering in a windless environment at 20 meters above sea level and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Operating Radius: 10 km
Measured in an environment of approximately 25° C (77° F) with a safe battery level of 15%, windless environment, round-trip flight speed of approximately 15 m/s, and hovering operation of 18 minutes. Results may vary depending on the environment, actual use, and firmware version.
Max Flight Distance: 43 km
Measured with Matrice 4D/4TD flying at a constant speed of 16 m/s in a windless environment at 20 meters above sea level and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
Max Pitch Angle: 25° (Normal Mode)
30° (Sport Mode)
Max Angular Velocity: 200°/s
Global Navigation Satellite System: GPS + BeiDou + Galileo + QZSS + GLONASS (QZSS and GLONASS are supported only when the RTK module is enabled.)
Hovering Accuracy Range (windless or breezy)
Vertical:
±0.1 m (with vision positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)
Horizontal:
±0.3 m (with vision positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)
Operating Temperature: -20° to 50° C (-4° to 122° F)
Ingress Protection Rating: IP55
Motor Model: 2611
Propeller Model: 1364F foldable low-noise anti-ice propellers
RTK Module: Integrated on the aircraft
Beacon: Integrated on the aircraft
Aircraft - Cameras
Image Sensor: DJI Matrice 4D:
Wide-Angle Camera: 4/3 CMOS, Effective Pixels: 20 MP
Medium Tele Camera: 1/1.3-inch CMOS, Effective Pixels: 48 MP
Tele Camera: 1/1.5-inch CMOS, Effective Pixels: 48 MP
DJI Matrice 4TD:
Wide-Angle Camera: 1/1.3-inch CMOS, Effective Pixels: 48 MP
Medium Tele Camera: 1/1.3-inch CMOS, Effective Pixels: 48 MP
Tele Camera: 1/1.5-inch CMOS, Effective Pixels: 48 MP
Lens: Wide-Angle Camera
DJI Matrice 4D
FOV: 84°
Format Equivalent: 24 mm
Aperture: f/2.8-f/11
Focus: 1 m to ∞
DJI Matrice 4TD
FOV: 82°
Format Equivalent: 24 mm
Aperture: f/1.7
Focus: 1 m to ∞
Medium Tele Camera
FOV: 35°
Format Equivalent: 70 mm
Aperture: f/2.8
Focus: 3 m to ∞
Tele Camera
FOV: 15°
Format Equivalent: 168 mm
Aperture: f/2.8
Focus: 3 m to ∞
Lens Defogging: DJI Matrice 4D and DJI Matrice 4TD: Wide-angle, medium tele, and tele cameras all support lens defogging
ISO Range: Normal Mode: ISO 100-25600
Night Scene Mode:
Matrice 4D
Wide-Angle Camera: ISO 100-204800
Medium Tele Camera: ISO 100-409600
Tele camera: ISO 100-409600
Matrice 4TD
Wide-Angle Camera: ISO 100-409600
Medium Tele Camera: ISO 100-409600
Tele Camera: ISO 100-819200
Shutter Speed: DJI Matrice 4D
Wide-Angle Camera:
Electronic Shutter: 2-1/8000 s
Mechanical Shutter: 2-1/2000 s
Medium Tele Camera:
2-1/8000 s
Tele Camera:
2-1/8000 s
DJI Matrice 4TD
2-1/8000 s
Max Image Size: DJI Matrice 4D
Wide-Angle Camera: 5280×3956
Medium Tele Camera: 8064×6048
Tele Camera: 8192×6144
DJI Matrice 4TD
Wide-Angle Camera: 8064×6048
Medium Tele Camera: 8064×6048
Tele Camera: 8192×6144
Minimum Photo Interval: DJI Matrice 4D: 0.5 s
DJI Matrice 4TD: 0.7 s
Still Photography Modes: DJI Matrice 4D
Wide-Angle Camera:
Single: 20 MP
Timed: 20 MP
JPEG: 0.5/0.7/1/2/3/5/7/10/15/20/30/60 s
JPEG + RAW: 2/3/5/7/10/15/20/30/60 s
Smart Capture: 20 MP
Panorama: 20 MP (raw image); 100 MP (stitched image)
Medium Tele Camera:
Single: 12 MP/48 MP
Timed: 12 MP/48 MP
JPEG: 0.5/0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Capture: 12 MP
Tele Camera:
Single: 12 MP/48 MP
Timed: 12 MP/48 MP
JPEG: 0.5/0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Capture: 12 MP
DJI Matrice 4TD
Wide-Angle Camera:
Single: 12 MP/48 MP
Timed: 12 MP/48 MP
JPEG: 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Capture: 12 MP
Panorama: 12 MP (raw image); 100 MP (stitched image)
Medium Tele Camera:
Single: 12 MP/48 MP
Timed: 12 MP/48 MP
JPEG: 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Capture: 12 MP
Tele Camera:
Single: 12 MP/48 MP
Timed: 12 MP/48 MP
JPEG: 0.7/1/2/3/5/7/10/15/20/30/60 s
Smart Capture:12MP
Video Codec and Resolution: DJI Matrice 4D and DJI Matrice 4TD
Video Codec: H.264, H.265
Encoding Strategy: CBR, VBR
Resolution:
4K: 3840×2160@30fps
FHD: 1920×1080@30fps
Video Bitrate: DJI Matrice 4D and DJI Matrice 4TD
H264: 60 Mbps
H265: 40 Mbps
Supported File System: exFAT
Photo Format: DJI Matrice 4D:
Wide-Angle Camera: JPEG/DNG (RAW)
Medium Tele Camera: JPEG
Tele Camera: JPEG
DJI Matrice 4TD: JPEG
Video Format: DJI Matrice 4D and DJI Matrice 4TD:MP4 (MPEG-4 AVC/H.264)
Digital Zoom: Tele Camera:
16x (112x hybrid zoom)
Aircraft - NIR Auxiliary Light
Infrared Illumination: DJI Matrice 4TD:
FOV: 5.7°±0.3°
Aircraft - Laser Module
Laser Rangefinding: Normal Incidence Range: 1800 m (1 Hz) @20% reflectivity target*
Oblique Incidence Range (1:5 Oblique Distance): 600 m (1 Hz)
Blind Zone: 1 m
Distance Measurement Accuracy:
1 m to 3 m: System Error <0.3 m, Random Error <0.1 m @1σ
Other Distances: ±(0.2+0.0015D) (Distance in meters)
* Performance degradation may occur in rainy or foggy conditions.
Aircraft - Infrared Thermal Camera (DJI Matrice 4TD)
Thermal Imager: Uncooled VOx Microbolometer
DO NOT expose the infrared camera lenses to strong sources of energy such as the sun, lava, or a laser beam. Otherwise, the camera sensor may be burned, leading to permanent damage.
Resolution: 640×512
Pixel Pitch: 12 μm
Frame Rate: 30 Hz
Lens: DFOV: 45°
Format Equivalent: 53 mm
Aperture: f/1.0
Focus: 5 m to ∞
Sensitivity: ≤ 50 mk@F1.0
Temperature Measurement Method: Spot Measurement, Area Measurement
Temperature Measurement Range: -20° to 150° C (-4° to 320° F, High Gain Mode)
0° to 500° C (32° to 932° F, Low Gain Mode)
Palette: White Hot/Black Hot/Tint/Iron Red/Hot Iron/Arctic/Medical/Fulgurite/Rainbow 1/Rainbow 2
Photo Format: JPEG (8-bit)
R-JPEG (16-bit)
Video Resolution: 1280×1024@30fps (UHR Infrared Image function enabled, Night Scene mode not enabled)
Other conditions: 640×512@30fps
Video Bitrate: 6.5Mbps (H.264 640×512@30fps)
5Mbps (H.265 640×512@30fps)
12Mbps (H.264 1280×1024@30fps)
8Mbps (H.265 1280×1024@30fps)
Video Format: MP4
Still Photography Modes: Single
Normal Mode: 640×512
UHR Infrared Image Mode: 1280×1024
Timed
Normal Mode: 640×512, 0.7/1/2/3/5/7/10/15/20/30/60 s
UHR Infrared Image Mode: 1280×1024, 0.7/1/2/3/5/7/10/15/20/30/60 s
Digital Zoom: 28x
Infrared Wavelength: 8-14 μm
Infrared Temperature Measurement Accuracy: High Gain: ±2℃ or ±2%, whichever is greater
Low Gain: ±5℃ or ±3%, whichever is greater
Aircraft - Storage
Supported Memory Cards: Aircraft:
U3/Class10/V30 or above is supported. A list of recommended microSD cards can be found below.
Recommended microSD Cards: Lexar 1066x 64GB U3 A2 V30 microSDXC
Lexar 1066x 128GB U3 A2 V30 microSDXC
Lexar 1066x 256GB U3 A2 V30 microSDXC
Lexar 1066x 512GB U3 A2 V30 microSDXC
Kingston Canvas Go! Plus 64GB U3 A2 V30 microSDXC
Kingston Canvas Go! Plus 128GB U3 A2 V30 microSDXC
Kingston Canvas Go! Plus 256GB U3 A2 V30 microSDXC
Kingston Canvas Go! Plus 512GB U3 A2 V30 microSDXC
Aircraft - Battery
Capacity: 6768 mAh
Voltage: 22.14 V
Max Charging Voltage: 25.5 V
Cell Type: Li-ion 6S
Chemical System: LiNiMnCoO2
Energy: 149.9 Wh
Weight: 640 g
Cycle Count: 400
Charging Temperature: 5° to 45° C (41° to 113° F)
Discharge Rate: 4C
Max Charging Power: 1.8C
Low-Temperature Charging: Supports low-temperature self-heating charging
Aircraft - Power Adapter
Input: 100-240 V (AC), 50/60 Hz, 3 A
Output Power: 240 W
Output: Total: 240W max output power; USB-C Port: 65W max output power
When charging with two ports simultaneously, the USB-C port's max output power is 45 W.
Charging Hub
Input: SDC: 16.8 V to 25.5 V, 12.1 A
Rated Power: 240 W
Charging Type: 3 batteries charging in sequence
Support: Standard Mode (100% SOC) and Ready-to-Fly Mode (90% SOC)
Compatible Battery: DJI Matrice 4D Series Battery
Charging Temperature: 5° to 40° C (41° to 104° F)
DJI RC Plus 2 Enterprise
Max Transmission Distance (unobstructed, free of interference): FCC: 25 km
CE: 12 km
SRRC: 12 km
MIC: 12 km
Measured in an unobstructed environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. During your flight, please pay attention to RTH reminder on the DJI Pilot 2 app.
Video Transmission Operating Frequency: 2.4000-2.4835 GHz
5.725-5.850 GHz (Not supported in Japan)
5.2 GHz (receive only)
Operating frequency allowed varies among countries and regions. Please refer to local laws and regulations for more information.
Antenna: 2T4R, built-in multi-beam high-gain antenna
Video Transmission Transmitter Power (EIRP): 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.2 GHz: <23 dBm (CE)
5.8 GHz: <33 dBm (FCC), <14 dBm (CE), <30 dBm (SRRC)
4G Transmission: DJI Cellular Dongle 2
Sold separately. This service is not available in some countries and regions. Please consult your local dealer for details.
Wi-Fi Protocol: Wi-Fi Direct, Wireless Display, IEEE 802.11a/b/g/n/ac/ax
Supports 2×2 MIMO Wi-Fi, dual-band simultaneous (DBS) support for dual MAC, with data rates up to 1774.5 Mbps (2×2 + 2×2 11ax dual-band simultaneous)
Wi-Fi Operating Frequency: 2.4000-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
5.2 and 5.8GHz frequencies are prohibited in some countries. In some countries, the 5.2GHz frequency is only allowed for use in indoor.
Wi-Fi Transmitter Power (EIRP): 2.4 GHz: <26 dBm (FCC), <20 dBm (CE/SRRC/MIC)
5.2 GHz: <26 dBm (FCC), < 23 dBm (CE/SRRC/MIC)
5.8 GHz: <26 dBm (FCC/SRRC), <14 dBm (CE)
Bluetooth Protocol: Bluetooth 5.2
Bluetooth Operating Frequency: 2.400-2.4835 GHz
Bluetooth Transmitter Power (EIRP): <10 dBm
Screen Resolution: 1920 × 1200
Screen Size: 7.02 inches
Screen Frame Rate: 60 fps
Brightness: 1400 nit
Touchscreen Control: 10 Points Multi-touch
Built-in Battery: 2S2P High Energy Density 18650 Lithium-ion Battery (6500 mAh @ 7.2 V) 46.8Wh
External Battery: Optional, WB37 (4920 mAh @ 7.6 V) 37Wh
Charging Type: Supports PD fast charging, with a maximum 20V/3.25A USB Type-C charger
Storage Capacity: RAM 8G + ROM 128G UFS + expandable storage via microSD card
Charging Time: 2 hours for internal battery; 2 hours for internal plus external batteries. When remote controller is powered off and using a standard DJI charger.
Internal Battery Runtime: 3.8 hours
External Battery Runtime: 3.2 hours
Output Port: HDMI 1.4
Indicators: Status LED, battery level LED, connection status LED, tricolor light, brightness adjustable according to ambient light
Speaker: Supports buzzer
Audio: Array MIC
Operating Temperature: -20° to 50° C (-4° to 122° F)
Storage Temperature: Within one month: -30° to 45° C (-22°F to 113°F)
One to three months: -30° to 35° C (-22°F to 95°F)
Three months to one year: -30° to 30° C (-22°F to 86°F)
Charging Temperature: 5° to 40° C (41° to 104° F)
Supported Aircraft Models: Supports Matrice 4TD/4D, Matrice 4T/4E
Global Navigation Satellite System: GPS, Galileo, BeiDou.
Dimensions: 268×163×94.5 mm (L×W×H) Width including external antenna folded, thickness including handle and controller sticks.
Weight: 1.15 kg (without external battery)
Model: TKPL 2
System Version: Android 11
External Interfaces: HDMI 1.4, SD 3.0, Type-C with OTG support, max 65W PD charging, USB-A with USB 2.0 support
Accessory: Optional strap/waist support
AL1 Spotlight
Weight: 99 g (including bracket)
91 g (excluding bracket)
No mounting bracket is required when installing on Matrice 4D Series aircraft.
Dimensions: 95×164×30 mm (L×W×H, including bracket)
79×164×28 mm (L×W×H, excluding bracket)
Max Power: 32 W
Illuminance: 4.3±0.2 lux @ 100 meters, 17±0.2 lux @ 50 meters
The data was measured in a laboratory environment with the spotlight installed separately on the aircraft at an ambient temperature of 25°C (77° F).
Effective Illumination Angle: 23° (10% relative illumination)
Effective Illumination Area: 1,300 square meters @ 100 meters (10% relative illumination, Normal mode)
2,200 square meters @ 100 meters (10% relative illumination, Wide FOV mode)
Operating Mode: Supports always-on and strobe modes.
Gimbal Mechanical Range: Tilt: -140° to +50°
Gimbal Controllable Range: Tilt: -90° to +35°
Gimbal Max Control Speed (tilt): 120° /s
Gimbal Alignment Accuracy: ±0.1°
Operating Temperature: -20° to 50° C (-4° to 122° F)
Ingress Protection Rating: IP55
Mounting: Quick-release hand-tightened screw
When installing onto the aircraft, tighten the screws and ensure proper sealing of the interface. When using with DJI Dock, please use the included hex wrench to tighten the screws again.
Supported Aircraft Models: Supports Matrice 4TD/4D, Matrice 4T/4E
AS1 Speaker
Weight: 92.5 g (including bracket)
90 g (excluding bracket)
No mounting bracket is required when installing on Matrice 4D Series aircraft.
Dimensions: 73×70×52 mm (L×W×H, including bracket)
73×70×47 mm (L×W×H, excluding bracket)
Max Power: 15 W
Max Volume: At 1 meter, it can reach 114 decibels (114dB@1m). Data measured in a laboratory environment at 25° C (77° F). Actual conditions may vary slightly due to software version, audio source, specific environment, and other factors. The final effect is subject to actual use.
Effective Broadcast Distance: 300 m
Data measured in a laboratory environment at 25° C (77° F). Actual conditions may vary slightly due to software version, audio source, specific environment, and other factors. The final effect is subject to actual use.
Broadcast Mode: Real-time broadcasting, record & broadcast, file input (supports simultaneous transfer and playback), text-to-speech*
* Currently supports only English and Mandarin Chinese.
Operating Temperature: -20° to 50° C (-4° to 122° F)
Ingress Protection Rating: IP55
Mounting: Quick-release hand-tightened screw
When installing onto the aircraft, tighten the screws and ensure proper sealing of the interface. When using with DJI Dock, please use the included hex wrench to tighten the screws again.
Supported Aircraft Models: Supports Matrice 4TD/4D, Matrice 4T/4E
Matrice 4 Obstacle Sensing Module
Weight: 225 g
Dimensions: 103.3×64×85.8 mm (L×W×H)
Ingress Protection Rating: IP55
Operating Temperature: -20° to 50° C (-4° to 122° F)
Sensing Type: Combination of LiDAR and five-direction millimeter-wave radar
FOV: LiDAR: Vertical 360°, Horizontal 60°
Millimeter-wave Radar: Vertical 90°, Horizontal 90°
Measurement Range: 100m max detection distance
Effective Sensing Speed: Flight Speed ≤15 m/s (obstacle type: 12mm steel-core aluminum stranded wire)
1. The obstacle avoidance and bypassing capabilities may vary due to different environments (clouds, fog, rain, snow), and the material, position, and shape of the target object.
2. Due to the performance limitations of the safety system, the aircraft cannot actively avoid fast-moving objects. Please stay cautious when flying in such environments.
Vehicle-Mounted Gimbal Mount
Weight: Right Bracket and Gimbal Support: 440 g
Left Bracket: 155 g
Dimensions: Right bracket and gimbal support: 112.8×152.2×157.8 mm (L×W×H)
Left Bracket: 126.3×172.9×70.3 mm (L×W×H)
Power Supply Voltage: 14 V
Ingress Protection Rating: IP55
Operating Temperature: -30° to 50° C (-22° to 122° F)
Footnotes
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
In the box
Below are our Christmas and New Year store hours for all locations:
Auckland Retail Store
Monday 23rd December – 8:30am – 5:00pm
Tuesday 24th December – 8:30am – 2:30pm
Wednesday 25th December – CLOSED
Thursday 26th December – CLOSED
Friday 27th December – 9:00am – 5:00pm
Saturday 28th December – 10:00am – 4:30pm
Sunday 29th December – CLOSED
Monday 30th December – 8:30am – 5:00pm
Tuesday 31st December – 8:30am – 2:30pm
Wednesday 1st January – CLOSED
Thursday 2nd January – CLOSED
Christchurch Retail Store:
Closed 25th December 2024 – 5th January 2025
Commercial Solutions:
Closed 21st December 2024 – 5th January 2025
Service Center:
Closed 21st December 2024 – 5th January 2025
WHY BUY FROM US?
By buying from Ferntech, you'll have the confidence that you are dealing directly with New Zealand's leading drone experts. Our staff are knowledgable drone pilots who offer expert advice, trusted support and superior specialist service. Only through us will you receive a full New Zealand warranty, phone and email support, and access to our certified Repairs Centre with DJI-qualified drone technicians. And we guarantee that we will have the best prices on the market — if not let us know and we will match any price (conditions apply).
Warranty Details
Dock
What is the difference between DJI Dock 3 and DJI Dock 2?
DJI Dock 3 is an iterative upgrade of DJI Dock 2, with the following main upgrades compared to the previous generation: 1. IP rating upgraded to IP56. 2. Operating temperature range widened to -30° to 50° C (-22° to 122° F) . 3. Video transmission system upgraded to O4+ Enterprise. 4. Supports vehicle-mounted deployment. 5. With the D-RTK 3 Relay Fixed Deployment Version, site selection of DJI Dock 3 becomes more flexible. 6. Supports quick takeoff, ready to fly as soon as the cover is opened. 7. Lower live view latency for a smoother operation experience. 8. Improved cooling and heating performance of the air conditioner.
What is the minimum interval DJI Dock 3 can recharge the aircraft for a second operation? Can DJI Dock 3 automatically replace the aircraft's battery?
Measured with an ambient temperature of 25° C (77° F) and an aircraft battery level of 15% after landing, it takes 27 minutes to charge the aircraft's battery to 95%. Therefore, the minimum interval between two operations is 27 minutes. DJI Dock 3 does not support automatic battery replacement for the aircraft.
Does DJI Dock 3 support one drone with multiple docks and one dock with multiple drones?
Supports one drone with multiple docks (multi-dock task). Does not support multiple drones with one dock.
Does DJI Dock 3 support multi-dock tasks?
Yes. When the dock links with the the D-RTK 3 Relay Fixed Deployment Version, multi-dock tasks are not supported.
Does DJI Dock 3 support edge computing?
Yes, the edge computing module requires an additional external power supply and network connection.
Does DJI Dock 3 support private 4G enhanced video transmission?
Yes, for details, please visit: https://developer.dji.com/resources/server/free/ DJI Cellular Dongle 2 is sold separately. This service is not available in some countries and regions. Please consult your local dealer for details.
Which drones does DJI Dock 3 support?
DJI Dock 3 only supports the DJI Matrice 4D Series drones.
What conditions will cause the cooling and heating functions of DJI Dock 3 to be automatically enabled or disabled?
The cooling function of DJI Dock 3 will be enabled when the ambient temperature exceeds 5° C (41° F) and the aircraft battery temperature exceeds 35° C (95° F). The cooling function of DJI Dock 3 will be disabled when the aircraft battery temperature drops below 30° C (86° F). The heating function of DJI Dock 3 will be enabled when the ambient temperature is below 5° C (41° F), the temperature within the dock is below 35° C (95° F) , and the battery temperature is below 35° C (95° F). The heating function of DJI Dock 3 will be disabled when the temperature within the dock exceeds 35° C (95° F) or the aircraft battery temperature exceeds 35° C (95° F). The cooling and heating logic may be optimized with firmware updates. Please refer to the actual use.
What are the installation environment requirements for DJI Dock 3?
It should be installed in an open environment with stable power supply and internet at altitudes not exceeding 4,500 meters. For details, please refer to the Installation and Setup Manual.
What is the maximum wind speed and rainfall in which DJI Dock 3 can continue to operate normally?
The maximum wind speed is 12 m/s, and the maximum rainfall is 2 mm/h.
What precautions should be taken for vehicle-mounted deployment of DJI Dock 3?
Ensure the installation complies with local regulations. Ensure safety when loading the dock onto the vehicle, and do not apply force to the RTK module during handling. Ensure the dock base is securely fixed to the vehicle mounting bracket, and install and tighten the lock nuts. The dock base should be equipped with a safety rope that connects the dock to the vehicle properly. The Vehicle-Mounted Gimbal Mount must be installed correctly. Please affix the included driving warning sticker to the dashboard. For detailed operational procedures, please refer to the Installation and Setup Manual.
What precautions should be taken for using DJI Dock 3 with vehicle-mounted deployment?
The parking slope must be less than 3° during operation. Remote dock calibration must be completed in the cloud before operation. During aircraft operation, the vehicle and the dock must not move. If movement occurs, the aircraft will immediately return to the absolute position of the relative alternate site. When driving and entering or exiting underground parking garages, be sure to pay attention to road safety and height restrictions. Ensure the dock cover is closed when the vehicle is moving. When deploying two docks on one vehicle, they must be added to the same project to ensure safe takeoff and landing of multiple aircraft.
Does the built-in backup battery of DJI Dock 3 support charging the aircraft?
No.
How is the precision landing of DJI Dock 3's aircraft achieved?
The aircraft achieves precise positioning through the RTK positioning system and visual markers on the dock's landing pad and the inner side of the cover.
How do I power on the backup battery of DJI Dock 3?
When there is no grid power supply, press once and then press and hold the multifunction button inside the electrical cabinet to power on the backup battery. When there is grid power supply, the backup battery will automatically power on without additional operation.
How do I power off DJI Dock 3?
Turn off the AC power switch, then press once and then press and hold the multifunction button inside the electrical cabinet to power off the backup battery.
How do I purchase DJI Dock 3?
Please contact your local DJI dealer.
What drones does DJI Dock 3 support for dock site evaluation?
DJI Matrice 4D Series and DJI Matrice 4 Series drones*. *Aircraft and remote controllers need to be updated to the latest firmware.
Aircraft
How many versions does the DJI Matrice 4D Series have? What are the differences between them?
DJI Matice 4D Series currently includes two versions - DJI Matrice 4D and DJI Matrice 4TD. DJI Matrice 4D is equipped with a 4/3 CMOS 20MP wide-angle camera, a 1/1.3-inch CMOS 48MP medium tele camera, a 1/1.5-inch CMOS 48MP tele camera, and a laser range finder, providing powerful imaging capabilities. DJI Matrice 4TD is equipped with a 1/1.3-inch CMOS 48MP wide-angle camera, a 1/1.3-inch CMOS 48MP medium tele camera, a 1/1.5-inch CMOS 48MP tele camera, a infrared thermal camera, an NIR auxiliary light, and a laser range finder. It features powerful thermal imaging and low-light imaging capabilities.
What is the certification level of the DJI Matrice 4D Series in Europe?
The DJI Matrice 4D Series is C2 and C6 certified by the European Union Aviation Safety Agency (EASA).
What is the IP rating of the DJI Matrice 4D Series drones?
IP55.
Do cameras on DJI Matrice 4D Series support mapping without GCPs?
Only the 4/3 CMOS wide-angle camera on DJI Matrice 4D supports mapping without GCPs.
What precautions should be taken when using the infrared thermal camera of DJI Matrice 4TD?
DO NOT expose the infrared camera lenses to strong sources of energy such as the sun, lava, or a laser beam. Otherwise, the camera sensor may be burned leading to permanent damage.
What is the difference between the DJI Matrice 4D Series and the Matrice 4 Series?
The DJI Matrice 4D Series has the following main differences compared to the Matrice 4 Series: 1. Supports IP55 protection rating. 2. Maximum flight time of 54 minutes. 3. Supports greater payload capacity. 4. Supports airborne relay, where one drone can fly high as a relay, addressing signal issues in mountainous terrains. 5. Arms of Matrice 4D Series drones are not foldable.
Why can the arms of the DJI Matrice 4D series be moved, and why are there visible gaps at the base of the arms?
The DJI Matrice 4D Series drones incorporate rotational dampers at the base of each arm to dampen arm vibration, ensuring reliable, long-time flight in various environments. The arms can rotate at a small angle, and visible gaps at the base of the arms are normal design characteristics.
What precautions should be taken when using the anti-ice propellers of the DJI Matrice 4D Series drones?
The anti-icing effectiveness of the propellers decreases with usage over time. Please replace the propellers at least every 12 months or after 500 flight hours. Do not scratch the surface of the propellers or touch them directly with your fingers. Do not use oil-based or alcohol-based solvents to wipe the propellers, as this may damage the anti-icing layer on the surface. Each set of propellers is dynamically balanced. When replacing propellers, please use the propellers from the same package and do not mix them with propellers from other packages. If the propellers become deformed or damaged during use, they need to be replaced promptly. When replacing propellers, be sure to simultaneously replace the corresponding washers and screws. Do not reuse them.
Why are the propeller tips of the DJI Matrice 4D Series drones curved?
To provide better noise reduction.
Do the DJI Matrice 4D Series drones support manual flight with a remote controller?
Yes, they can link with DJI RC Plus 2 Enterprise for manual flight.
Do the DJI Matrice 4D Series drones support simultaneous use with dual remote controllers?
No.
How do the DJI Matrice 4D Series drones perform linking for airborne relay operations?
After linking two drones with two remote controllers respectively, set the aircraft as the Main Aircraft (operating aircraft) on the DJI Pilot 2 app of the remote controller A, and set the aircraft as the Relay Aircraft on the DJI Pilot 2 app of the remote controller B. Wait for the two drones to automatically re-link. Once the linking is completed, you can check the connection topology status on the main page.
Do the DJI Matrice 4D Series drones support airborne relay when connected with DJI Dock 3?
Currently no.
Remote Controller
Can the DJI Matrice 4D Series drones be used with the remote controllers of the Matrice 4 Series?
Yes. The remote controller needs to be updated to the latest firmware.
Can I use other USB-C chargers to charge DJI RC Plus 2 Enterprise?
Yes. To ensure charging speed, it is recommended to prioritize using the DJI 100W USB-C Power Adapter and other 100W+ chargers that support the PD protocol.
Does DJI RC Plus 2 Enterprise support MSDK?
Yes.
Does DJI RC Plus 2 Enterprise support the DJI Matrice 3D Series drones?
No.
Battery & Charger
How to charge the DJI Matrice 4D Series Battery?
DJI Matrice 4D Series Battery can be charged with DJI Dock 3 and the DJI Matrice 4D Series 240W Charging Hub.
What functions does the DJI Matrice 4D charging hub support?
The DJI Matrice 4D Series 240W Charging Hub supports two charging modes. By toggling the mode switch on the side of the charging hub, you can switch between the charging modes. Standard Mode: Each battery is charged to 100% in sequence. Ready-to-Fly Mode: Each battery is charged to 90% in sequence and kept at 90% after charging. This mode facilitates quick use of batteries.
How long does it take to fully charge a DJI Matrice 4D Series Battery?
Charging with the DJI Matrice 4D Series 240W Charging Hub: In Standard Mode, it takes approximately 40 minutes to fully charge one DJI Matrice 4D Series Battery from 15%. In Ready-to-Fly Mode, it takes approximately 30 minutes to charge one DJI Matrice 4D Series Battery from 15% to 90%. Charging with DJI Dock 3: In Standard Mode, it takes approximately 37 minutes to fully charge one DJI Matrice 4D Series Battery from 15%. In Ready-to-Fly Mode, it takes approximately 27 minutes to charge one DJI Matrice 4D Series Battery from 15% to 95%.
Can the DJI Matrice 4D Series charging hub charge the batteries using other USB-C chargers?
No.
Can the DJI Matrice 4D Series batteries and charging hub be charged by the DJI Power series portable power stations?
Yes, you can connect the charging hub to the SDC port of the power station for charging. The DJI Power series power station must be updated to the latest firmware.
Can the DJI Matrice 4D Series Battery be charged when it is mounted on the aircraft?
No.
Can the DJI Matrice 4D Series Battery be used in low-temperature environments?
DJI Matrice 4D Series Battery can work in the operating environment from -20° to 45° C (-4° to 113° F). The battery life will be shortened when used in low-temperature environments. Please schedule the flight time properly.
What is the function of the screw holes at the rear of the DJI Matrice 4D Series Battery?
For mounting parachute and other payloads.
D-RTK 3 Relay Fixed Deployment Version
What functions does the D-RTK 3 Relay Fixed Deployment Version provide?
Used with designated DJI aircraft and Dock, it can be set up at a high location as a relay to address signal obstruction issues. This feature is only available in countries or regions that support the 5 GHz band. Please refer to local laws and regulations.
How to activate the D-RTK 3 Relay Fixed Deployment Version?
It can be activated on the the DJI Enterprise app or by connecting its Type-C port to DJI Assistant 2 (Enterprise Series) using a cable.
Is re-linking required when replacing the aircraft or DJI Dock of the D-RTK 3 Base Station Fixed Deployment Version?
After replacing the aircraft, re-link the aircraft with DJI Dock to restore the connection with the relay station. To replace the dock, re-link the relay station and the dock.
What are the power supply requirements for the PoE module of the D-RTK 3 Relay Fixed Deployment Version?
When the cable distance between the relay station and the dock is less than 100 meters, it is recommended to power the PoE module by directly connecting it to the PoE output port of DJI Dock 3 via an Ethernet cable. When the cable distance between the relay station and DJI Dock is greater than 100 meters, an additional PoE power supply needs to be purchased for separate power supply*. * It is recommended to use a Type 4 PoE power supply with a power greater than 30 W.
What are the differences between the D-RTK 3 Relay Fixed Deployment Version and the D-RTK 3 Multifunctional Station?
The D-RTK 3 Relay Fixed Deployment Version only supports relay station mode and is mainly used for fixed deployment of DJI Dock 3. The D-RTK 3 Multifunctional Station supports relay station, base station, and mobile station modes, and can work with various DJI drones.
Which devices or aircraft are compatible with the D-RTK 3 Relay Fixed Deployment Version?
It can work with DJI Dock 3 and Matrice 4D Series drones.
How to conduct site evaluation and selection when installing the D-RTK 3 Relay Fixed Deployment Version?
You can use the Matrice 4D Series aircraft and the remote controller to conduct site evaluation and selection at the intended relay deployment location based on the DJI Pilot 2 app instructions, and deploy the relay station according to the site selection results.
Can the PoE module of D-RTK 3 Relay Fixed Deployment Version be removed for standalone use?
No.
Can the D-RTK 3 Relay Fixed Deployment Version provide RTK positioning for the aircraft?
Yes, when used as a relay station for DJI Dock 3, the aircraft will check the RTK data quality of both DJI Dock 3 and the relay station, selecting the data source to ensure reliable positioning.
Can the D-RTK 3 Relay Fixed Deployment Version continue to be used after a PoE power outage?
The relay station has a built-in backup battery, allowing it to continue working for a while after a power outage. Please troubleshoot and restore power supply promptly.
How many aircraft can the D-RTK 3 Relay Fixed Deployment Version connect to simultaneously?
One only.
What app is used for deploying the D-RTK 3 Relay Fixed Deployment Version?
DJI Enterprise app.
Are there any distance restrictions for deploying the D-RTK 3 Relay Fixed Deployment Version relative to DJI Dock 3?
It is recommended to deploy within 1 kilometer of the dock, maintaining a clear line of sight between DJI Dock 3 and the relay station, with no obstructions or interference. The distance between the relay station and the dock must be less than 100 meters during the linking process.
What is the signal coverage range of the D-RTK 3 Relay Fixed Deployment Version?
In unobstructed and interference-free conditions, the D-RTK 3 Relay Fixed Deployment Version can extend the video transmission range up to 25 km.
Can D-RTK 3 Relay Fixed Deployment Version be used independently without connecting to DJI Dock 3?
Currently no.
Speaker/Spotlight
What functions are supported with the DJI AS1 Speaker?
The DJI AS1 Speaker supports record & broadcast, file input, and text-to-speech functions*. It also features real-time broadcasting and echo suppression, making emergency search and rescue operations more efficient and flexible. The spotlight and speaker can be used independently or in combination, meeting the needs of more operational scenarios. * The text-to-speech function currently only supports English and Mandarin Chinese.
Which drones are compatible with the DJI AS1 Speaker?
DJI Matrice 4D Series and DJI Matrice 4 Series aircraft. When installed on DJI Matrice 4D Series aircraft, the bottom bracket must be removed.
What precautions should be taken when installing the DJI AS1 Speaker?
Remove the bottom bracket of the speaker. Install the speaker before turning on the aircraft. Do not install the speaker while the aircraft is powered on. When installing onto the aircraft, tighten the screws and ensure proper sealing of the interface. When using with DJI Dock, use the included hex key to tighten the screws again. After installation, connect to the internet to activate the speaker and calibrate compass as instructed. If there is a firmware update notification, update to the latest firmware promptly.
What precautions should be taken when using the DJI AS1 Speaker?
Please pay attention to the following when using the speaker: 1. After installing the speaker, the aircraft's power performance and flight time will be affected. Please pay attention to flight safety. 2. Use the standard remote controller to play human voices for optimal sound effect. It is not recommended to play single-frequency sounds to avoid irreversible damage to the speaker. 3. DO NOT use the speaker near people or in an urban area where noise-sensitive structures are concentrated, as the loudness could lead to accidents or injuries.
Which languages does the DJI AS1 speaker support for text-to-speech?
Currently only supports English and Mandarin Chinese.
What are the tips for using the real-time broadcasting feature of the DJI AS1 Speaker?
When speaking, stay close to the microphone of the remote controller or computer, and try to maintain a steady speaking pace.
What shortcut operations does the DJI AS1 speaker support?
It supports shortcuts to start/stop real-time broadcasting. You can set the shortcuts in Customize RC Buttons on the DJI Pilot 2 app for quick operation during tasks.
How to update the firmware of the DJI AS1 Speaker?
Install the speaker on the aircraft, and it will be updated along with the aircraft firmware. There are four ways to update the firmware: 1. Perform a one-click update on the device management page of DJI FlightHub 2. 2. Connect the aircraft to a computer and use the DJI Assistant 2 (Enterprise Series) to update. 3. Tap firmware update on the main interface of the DJI Pilot 2 app. 4. When the DJI Pilot 2 app prompts for a consistent update for all modules, confirm the update.
What functions does the DJI AL1 Spotlight provide?
The DJI AL1 Spotlight supports two lighting modes: constant and strobe; it also supports enabling and disabling the gimbal follow function*. The spotlight and speaker can be used independently or in combination, meeting the needs of more operational scenarios. The new wide FOV lighting mode can illuminate a broader area in wide-angle mode*. * All devices need to be updated to the latest firmware.
What drones are compatible with the DJI AL1 Spotlight?
DJI Matrice 4D Series and DJI Matrice 4 Series drones.
What precautions should be taken when installing the DJI AL1 Spotlight?
Use tools to remove the bracket at the bottom of the spotlight. Install the spotlight before turning on the aircraft. Do not install the spotlight while the aircraft is powered on. Ensure the screws are tightened when installing onto the aircraft to secure the installation. When using with DJI Dock, use the included hex key to tighten the screws again. After installation, connect to the internet to activate the spotlight as instructed. If there is a firmware update notification, update to the latest firmware promptly.
What precautions should be taken when using the DJI AL1 Spotlight?
Please pay attention to the following when using the spotlight: 1. After installing the spotlight, the upward obstacle avoidance of the aircraft will be disabled, and the power performance and flight time will be affected. When the spotlight is turned on, the obstacle avoidance function will deactivate automatically. Please pay attention to flight safety. 2. DO NOT point the spotlight directly at people’s eyes to avoid causing eye damage. 3. The spotlight may become hot after prolonged operation. Please be careful to avoid burns.
What are the tips for using the DJI AL1 Spotlight?
When using the spotlight during high-altitude flights, the presence of water vapor and particulates in the atmosphere may cause the image to appear white. It is recommended to enable the electronic defogging function* for better image quality. It is recommended to appropriately reduce the brightness of the spotlight and turn it on as needed to minimize the impact on the aircraft's flight time. * This feature is currently only supported by the DJI Pilot 2 app.
Does the DJI AL1 spotlight support disabling the gimbal follow function?
In the spotlight settings, you can choose to disable the gimbal follow function. Please note that once disabled, the spotlight will maintain its current angle; when re-enabled, the spotlight will automatically adjust to align with the gimbal's orientation. The gimbal follow function will remain enabled by default after the aircraft restarts.
How to use the wide FOV lighting mode of the DJI AL1 Spotlight?
In the app's spotlight settings, turn on the wide FOV lighting mode to increase the illumination range. When activated, the illumination range is extended by offsetting the gimbals on both sides. This feature is linked to the camera zoom ratio and is only effective with the wide-angle camera and 1X zoom.
What shortcut operations does the DJI AL1 Spotlight support?
It supports shortcuts to turn on/off/ strobe. You can set the shortcuts in Customize RC Buttons on the DJI Pilot 2 app for quick operation during tasks.
How to update the firmware of the DJI AL1 Spotlight?
Install the spotlight on the aircraft, and it will be updated along with the aircraft firmware. There are four ways to update the firmware: 1. Perform a one-click update on the device management page of DJI FlightHub 2. 2. Connect the aircraft to a computer and use the DJI Assistant 2 (Enterprise Series) to update. 3. Tap firmware update on the main interface of the DJI Pilot 2 app. 4. When the DJI Pilot 2 app prompts for a consistent update for all modules, confirm the update.
What precautions should be taking when using the DJI AL1 Spotlight and DJI AS1 Speaker together?
When using the loudspeaker and spotlight as a combined unit, please remove the bottom adapter bracket of the loudspeaker and spotlight, install the loudspeaker onto the top interface of the spotlight, and tighten the screws.
What are the transportation and storage precautions for the DJI AL1 Spotlight and DJI AS1 Loudspeaker?
1. The products may be damaged or malfunction upon impact. DO NOT drop the product. 2. The aircraft can be directly stored in the safety case with the spotlight installed.
Obstacle Sensing Module
Which aircraft are compatible with the DJI Matrice 4D Series' Obstacle Sensing Module?
DJI Matrice 4D Series and DJI Matrice 4 Series drones. When installed on the Matrice 4 Series drones, a bracket needs to be installed at the bottom of the Obstacle Sensing Module.
What precautions should be taken when installing DJI Matrice 4D Series' Obstacle Sensing Module?
Tighten the screws and ensure proper sealing of the interface. When using with DJI Dock, please use the included hex key to tighten the screws again. When using with DJI Dock, please correctly attach the LiDAR positioning label on the dock cover as instructed in the manual. Please complete the installation of the Obstacle Sensing Module accessories before turning on the aircraft. Do not install the Obstacle Sensing Module accessories while the aircraft is powered on. After installation, connect to the internet and activate the Obstacle Sensing Module as prompted. If there is a firmware update prompt, please update to the latest firmware in a timely manner.
What precautions should be taken when using the DJI Matrice 4D Series' Obstacle Sensing Module?
Please keep the radar dome clean to avoid affecting the obstacle avoidance performance. Rain, snow, fog, and dust can affect obstacle avoidance performance. Due to the limitations of the safety system, the aircraft cannot actively avoid fast-moving objects. Please fly with caution and take manual control if necessary.
How to update the firmware of the DJI Matrice 4D Series' Obstacle Sensing Module?
Install the Obstacle Sensing Module on the aircraft, and it will be updated along with the aircraft firmware. There are four ways to upgrade the firmware: 1. Perform a one-click update on the device management page of DJI FlightHub 2. 2. Connect the aircraft to a computer and use the DJI Assistant 2 (Enterprise Series) to update. 3. Tap firmware update on the main interface of the DJI Pilot 2 app. 4. When the DJI Pilot 2 app prompts for a consistent update for all modules, confirm the update.
Vehicle-Mounted Gimbal Mount
What precautions should be taken when installing the Vehicle-Mounted Gimbal Mount?
Before installation or connecting/disconnecting device cables, first power off the dock. Do not press the dock cover forcefully during installation. Ensure the bracket is installed as shown in the diagram. Do not install it in reverse. Use the correct screws as shown in the diagram, and ensure all screws are tightened. Do not place installation tools on the landing pad at any time. Before closing the dock cover, ensure the landing pad surface is free of foreign objects and dirt. Please attach the included reminder sticker onto the cockpit's control panel.
Accessory
When the dock is being charged with a fully-recharged DJI Power 1000 series portable power station, how long can the operating time be?
Continuous operation of the aircraft: At an ambient temperature of 25° C (77° F), with continuous operation of the aircraft and the dock's air conditioning set to cooling, the operating time is 2 to 3 hours. Dock and aircraft standby: At an ambient temperature of 25° C (77° F), with the air conditioning in idle mode, it can last 7 to 8 hours. The above data is for reference only, as the actual operating time is affected by ambient temperature and the dock's operating conditions.
Are DJI Matrice 4D Series drones compatible with DJI Goggles?
No.
Software
What apps are supported by the DJI Matrice 4D Series?
DJI Pilot 2 app and other software developed by using MSDK.
Does DJI Matrice 4D Series support DJI FlightHub 2?
Yes.
Does DJI Matrice 4TD support smart oblique capture?
DJI Matrice 4TD supports smart oblique capture in the oblique collection function of the area route.
What are the similarities and differences between the smart oblique capture in the oblique collection of the area route of the DJI Matrice 4D Series aircraft and the DJI Mavic 3E?
The DJI Matrice 4D Series aircraft features 5-direction smart oblique capture, which allows data collection to be completed with just one route. In contrast, the DJI Mavic 3E features 3-direction smart oblique capture, requiring two routes to complete data collection.
What are the similarities and differences between the smart oblique capture in the oblique collection function of the area route of the DJI Matrice 4D Series and the Zenmuse P1?
Both the DJI Matrice 4D Series and the Zenmuse P1 feature 5-direction smart oblique capture. However, the DJI Matrice 4D Series' smart oblique capture is in an "X" shape, while the Zenmuse P1's smart oblique capture is in a "+" shape.
Application
Does the DJI Matrice 4D series support precision mapping?
DJI Matrice 4D supports precise mapping after enabling the RTK function. Equipping DJI Matrice 4TD with the RTK module can’t guarantee the final precision.
What SDKs does the DJI Matrice 4D Series support?
DJI Matrice 4D Series supports Payload SDK, Mobile SDK, and Cloud API. For technical support, please contact dev@dji.com.
How do I obtain information and technical support for the 'Intelligent Developer Program' of the DJI Matrice 4D Series?
You can visit the DJI Developer Platform for relevant information, or contact dev@dji.com for technical assistance.
Which models does the DJI Enterprise app support for deployment and commissioning?
DJI Dock 3 and D-RTK 3 Relay Station Fixed Deployment Version.
Is the DJI Matrice 4D Series compatible with the flight route of the DJI M30 Series?
The Matrice 4D Series is only compatible with the DJI M30 Series' flight routes when using the infrared thermal camera. It is not yet compatible with routes of wide-angle or zoom cameras.
Others
Can I use the DJI Matrice 4D Series across countries or regions?
No. Please confirm the applicable countries and regions with your dealer before purchasing.
Does the DJI Matrice 4D Series come standard with a DJI Cellular Dongle 2?
No.
There's currently no reviews for this product, be the first to write one.