DJI Phantom 4 RTK vs DJI Mavic 3 Enterprise

When it comes to surveying, mapping, and photogrammetry, DJI has paved the way with its outstanding range of cutting edge drones. And with the release of the Mavic 3 Enterprise Series, they have set a new standard of excellence. While the DJI Phantom 4 RTK was a worthy predecessor, this new lightweight aerial surveying solution delivers higher levels of precision and accuracy – giving you greater control and project efficiency (2 hour projects have been reduced to just 15 minutes*). Read on to learn the key differences between these drones, and find out why you should upgrade to the DJI Mavic 3 Enterprise today.

 

 

DJI Phantom 4 RTK vs DJI Mavic 3 Enterprise comparison

Before we deep dive into some of the outstanding features that come with the DJI Mavic 3 Enterprise, let’s take a quick look at the side-by specs of these two camera drones.

 

Specification DJI Mavic 3 Enterprise DJI Phantom 4 RTK
Cameras Wide camera: 4/3 CMOS, 20MP;
Tele camera: 1/2 inch CMOS, 7x-56x zoom
Wide camera: 1 inch CMOS, 20MP
Weight 915 g (without accessories) 1,391 g
Portability Foldable, one hand carry Unfoldable
Propeller Integrated with aircraft, foldable Must be installed every time
Max flight time 45 minutes
*42 minutes with RTK module
30 minutes
Max flight speed of mapping mission 15 m/s 13 m/s
Minimum Shooting Interval 0.7s 2.5s
Max ascent speed 6 m/s (N mode)
8 m/s (S mode)
6 m/s (mission flight)
5 m/s (manual flight)
6 m/s (mission flight)
5 m/s (manual flight)
Max descent speed 6 m/s 3 m/s
Max wind speed resistance 12 m/s 10 m/s
Obstacle avoidance Omnidirectional binocular vision system;
Infrared sensor at bottom of aircraft
Forward/rear/downward binocular vision system;
Infrared sensors at two sides
Advanced Return To Home (RTH) Supported Not supported
APAS (Advanced Pilot Assistance System) APAS 5.0 Not supported
Waypoint Supported Supported
Real-time Terrain Follow Supported Not supported
Controller DJI RC Pro Enterprise Standard RC and SDK RC
Additional modules Yes, including RTK Module and Loud Speaker No

 

 

DJI Mavic 3 Enterprise features

If you’re looking for industry-leading mapping efficiency and mission accuracy, the DJI Mavic 3 Enterprise is for you. An updated version of the already impressive DJI Mavic 3, the Enterprise comes with the following:

 

Real-Time Terrain Follow – you can automatically adjust altitude according to any elevation variations as you map, removing the need for external elevation data and ensuring real-time accuracy. This is the only DJI drone with this capability.

Increased efficiency – being able to capture images at 0.7s intervals dramatically reduces mapping times, so a job that used to take 2 hours to capture now only takes 15 minutes*.

Improved portability – with its compact size and 915 g weight, the Mavic 3 Enterprise is one of the industry’s lightest drones and can be held in one hand for simple transport.

Enhanced image precision – equipped with a wide-angle 4/3 inch, 20 megapixel sensor and mechanical shutter, the Mavic 3E avoids motion blur and supports rapid 0.7-second interval shooting for more efficient mapping and surveying.

Greater low-light performance – capture better videos and images in low-light conditions with the 3E’s 3.3μm pixel camera and intelligent low-light mode.

Focus and find – capture essential details from long range with the 12MP zoom camera with 56x max hybrid zoom.

Increased endurance – survey further and for longer periods with the Mavic 3 Enterprise’s 45-minute flight duration and 2 square kilometres maximum single flight distance.

Safer flying – with wide-angle lenses on all sides for omnidirectional obstacle avoidance, and APAS 5.0 for automatic rerouting around obstacles, the Mavic 3 Enterprise allows you to fly with complete peace of mind.

Next-generation image transmission – featuring DJI’s latest Quad-antenna O3 Enterprise Transmission technology, your pilots can maintain a stronger, more stable connection as they navigate more complex terrain.

Advanced return-to-home technology – save power and time by automatically planning the most efficient, optimal routes home.

ATTI mode – in the event that vision systems become unavailable or disabled, the Mavic 3 Enterprise automatically switches to ATTI mode giving the pilot 100% control (a key competency tested in 101 or 102 certification flight tests).

 

We’ve already mentioned the Mavic 3 Enterprise’s improved efficiency, but what does that really look like? *In the chart below, you can see that at 1cm GSD you can capture data seven times more efficiently. A job that would take 2 hours to capture now only takes 15 minutes!

 

 

Choosing the right solution for your surveying and mapping projects can be a difficult task, and shouldn’t be taken lightly. With the DJI Mavic 3 Enterprise, you have DJI’s most accurate, efficient, and cost-effective aerial surveying drone to date. If you’d like any more information on these drone solutions, please request a demo or get in touch with our team of experts.


 

SPEAK WITH A SPECIALIST

Contact our team today to discuss the right solution for you.